About Us

Why Choose Us

Testimonials

Articles/News

Home >> Heating Contractor >> Water Heaters

Chemung County Water Heater Contractors

With demand for water heaters in New York, the manufacturers provide different specifications: the energy input (Btu/hour for gas, kilowatts [kW] for electric); the temperature rise achievable at the rated flow; the flow rate at the listed temperature rise; and so on. In comparing different models, be aware that you aren’t always looking at direct comparisons, especially with temperature rise and flow rate. For example, while one model might list the flow rate at a 100°F temperature rise, another might list the flow rate at 70°. Until there are industry-standard ratings for temperature rise and flow rates, it will be difficult to compare the performance of products from different companies. Some companies are beginning to publish energy factor ratings for these products and this information should make for easier comparisons.

Secrets About Your Water Heater

Very often, tank failure and leaks are due to rusting. However, proper installation, maintenance and adjustment will keep your water heater rust-free and operating at peak efficiency. Follow these steps to ensure a healthy water heater in your Chemung County home:

• Check that your tank's anode rod has sufficient sacrificial metal remaining on its steel wire core. Replace it when necessary.

• If you have copper or brass water heater connections (hot, cold and recirculation loop lines), change them over to dielectric unions and plastic lined steel nipples. This will reduce this electrolytic corrosion.

• Make sure the bottom of your tank is sediment-free. When sediment accumulates in a gas heater, it forms a barrier between the water and the flame, slowing heat transfer. It also weakens the steel tank bottom and exposes it to water—and to potential rusting.

• Check that your tank's surroundings aren't harmful to the tank (avoid salt, chlorine, or other corrosive chemicals).

• Keep your heater as dry as possible. Make sure plumbing fittings are in good condition (such as the drain valve, heating elements, and hot and cold connections).

• Consider your tank's age before getting maintenance performed. A newer heater will have a sufficient anode rod, but an older heater may need a new anode. Also check for a damaged dip tube and for recalcitrant drains on an older unit.

If you are looking for a boiler repair contractor in Elmira, New York, please all us today at 607-733-2032 or complete our service request form.